F0022 DC Link Overvoltage fault in weg drive
F0022 DC Link Overvoltage fault in weg drive
Cause: DC bus voltage exceeded the maximum limit. Often caused by high supply voltage or a decelerating load with high inertia (regeneration).
Remedy:
Cause: DC bus voltage exceeded the maximum limit. Often caused by high supply voltage or a decelerating load with high inertia (regeneration).
Remedy:
- Increase the Deceleration Time (P0101).
- Install a dynamic braking resistor if the load has high inertia.
- Check if the input power supply voltage is within limits.
Comments
Post a Comment