W22 - Hoist Mechanical Brake fault in danfoss drive
W22 - Hoist Mechanical Brake fault in danfoss drive
Cause: In hoisting applications, the torque reference was not reached before the timeout, indicating a potential failure of the mechanical brake.
Solution:
Cause: In hoisting applications, the torque reference was not reached before the timeout, indicating a potential failure of the mechanical brake.
Solution:
- Inspect the mechanical brake on the hoist for proper operation.
- Check the brake control wiring and the brake release mechanism.
- Adjust the brake release/engage parameters in the drive if necessary.
Comments
Post a Comment