F07011 Motor Overtemperature (Calculated) fault in siemens drive
F07011 Motor Overtemperature (Calculated) fault in siemens drive indicates that the drive's thermal model calculates that the motor is overheating based on current and time.
Cause
1. Motor overloaded for too long.
2. Motor cooling fan failed.
3. Incorrect motor data entered.
Remedy
- Reduce motor load.
- Check motor cooling.
- Verify motor rating plate data in parameters.
- Increase thermal time constant if applicable.
Cause
1. Motor overloaded for too long.
2. Motor cooling fan failed.
3. Incorrect motor data entered.
Remedy
- Reduce motor load.
- Check motor cooling.
- Verify motor rating plate data in parameters.
- Increase thermal time constant if applicable.
Comments
Post a Comment