Fault 2310 in ABB ACS560 Drive

-

 Fault 2310 in ABB ACS560 Drive ?

Fault 2310 is Overcurrent fault. Output current has exceeded internal fault limit.

First check motor load and motor cable.

Second check motor current in each phase.

Third check IGBT using multimeter.

For More Information Click Here







Comments

  1. Unknown16 March 2022 at 04:06

    All, check same problem

    ReplyDelete
    Replies
    1. click2electro12 April 2022 at 03:11

      remove motor cable and then start drive for more information goto click2electro.com

      Delete
  2. Unknown16 March 2022 at 04:08

    Dear sir medam can you reply me

    ReplyDelete
  3. click2electro12 April 2022 at 03:10

    remove motor cable & start drive

    For more information goto click2electro.com

    ReplyDelete
  4. Anonymous17 June 2022 at 02:52

    remove connection from motor side and then check.

    ReplyDelete
  5. Anonymous8 September 2022 at 03:15

    mention the check point of fault 2310 over current in ACS580

    ReplyDelete
  6. click2electro9 September 2022 at 00:20

    same as ABB ACS560
    for more information goto click2electro.com

    ReplyDelete

Post a Comment

Popular posts from this blog

Fault 3381 in ABB ACS560 Drive

-
Image
  Fault 3381 in ABB ACS560 Drive ? 3381 fault is Output phase loss due to Motor circuit fault due to missing motor connection (any of the three phases not connected). 1.Check motor cable. If you run drive with motor of low rating motor as compare to drive then this fault comes. This fault can be disable by parameter Programmable fault: 31.19(Motor phase loss) - 0 (no action/disable) For more information click here
Read more

Fault 3181 in ABB ACS560 Drive

-
Image
  Fault 3181 in ABB ACS560 Drive ? 3181 fault in ABB ACS560 drive is wiring or earth fault due to Incorrect input power and motor cable connection (ie. input power cable is connected to drive motor connection) 1.Check power supply cable and motor cable. 2.Check input power connections. It is programmable fault: 31.23 Wiring or earth fault.(don't disable drive may be damage). For more information click here
Read more